RescueBlox gives New applications to 1st Responders

Multiple ways to support MVA Rescues

Low side Lifts

RescueBlox as a fulcrum for a class II lever

We were able to lift against 2 single RescueBlox as a high side fulcrum but if you tie RescueBlox together and use 4 as the fulcrum you have an interdependent assembly with a large footprint that would hold 100, 000 lbs. of WLL and 300,000 lbs. tested Load limit.

A dynamic load angle can be captured continuously with RescueBlox during a lift.

High Side Lifts

Using a Lashed Crib Stack for this new technique, creates continuous load contact

Lifting from the Low Side

Passive Lifts

Using the features of a vehicle to create space or remove drive wheel contact.

Curved Load Surfaces

Many curved or round objects can be supported using 2 RescueBlox lashed together with the 10,000 lbs. straps included

Here we have supported a side dump trailer on the high side with 2 RescueBlox as short struts. With our positive contact points that dig into steel we can lift this sizable object from the low side.